[ad_1]
DGUV Vorschrift 3, also known as the German Social Accident Insurance Regulation 3, is a set of regulations that govern the testing and inspection of workplace equipment in Germany. In this article, we will focus on the specific requirements for the inspection of mobile electrical equipment, also known as „ortsveränderliche Betriebsmittel.“
Prüffristen
Prüffristen refers to the inspection intervals that must be adhered to for orstveränderliche Betriebsmittel. These intervals are determined based on the type of equipment and the environment in which it is used. The purpose of these inspections is to ensure that the equipment is safe to use and in compliance with regulations.
Types of Inspections
There are two main types of inspections that must be carried out for orstveränderliche Betriebsmittel:
- Visual Inspection: This is a basic inspection that can be carried out by the user of the equipment. It involves checking for any visible damage or defects that may affect the safety of the equipment.
- Periodic Inspection: This is a more thorough inspection that must be carried out by a qualified professional. It involves testing the electrical safety of the equipment and checking for any internal defects that may not be visible during a visual inspection.
Inspection Intervals
The specific inspection intervals for orstveränderliche Betriebsmittel are determined by the employer based on the type of equipment and the level of risk associated with its use. However, there are some general guidelines that can be followed:
- Visual Inspections: These should be carried out regularly, ideally before each use of the equipment. Any defects or damage should be reported immediately.
- Periodic Inspections: These should be carried out at regular intervals, typically every 6 to 24 months depending on the type of equipment and the environment in which it is used.
Conclusion
Ensuring the safety of orstveränderliche Betriebsmittel is essential to prevent workplace accidents and injuries. By adhering to the inspection intervals outlined in DGUV Vorschrift 3, employers can ensure that their equipment is safe to use and in compliance with regulations.
FAQs
Q: Who is responsible for carrying out the inspections of mobile electrical equipment?
A: Employers are responsible for ensuring that the inspections of mobile electrical equipment are carried out in accordance with DGUV Vorschrift 3. They may designate qualified professionals to conduct the periodic inspections, but visual inspections can be carried out by the users of the equipment.
Q: What should be done if defects are found during an inspection?
A: If defects are found during an inspection, the equipment should be taken out of service immediately and repaired by a qualified professional. It should not be used until it has been deemed safe for use.
[ad_2]
